Product Description
Low Range Off Road Universal DIY Shock Hoop Kit
Sometimes shock towers are too limiting for custom axle and suspension configurations. This 20-inch DIY hoop kit can be configured to your rig as needed.
Important Note:
- When welding these hoops, we recommend plating the frame and/or adding gussets for reinforcement.
Contents
- Two 1.5" x .120 wall DOM Tube Hoops (Approx 20-Inches from inside of Bend to End of Tube)
- Four 1.5" DOM Mounting Tubes & Weld-On Ends
- Two 3/16-Inch Thick 1-Piece Shock Mounting Brackets
- Two ½-13 Grade 8 Bolts & Nylock Nuts
WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov
