Product Description
The perfect compressor to pair with your MORRFlate Multi Tire Inflation Kit.
This compressor is not designed for 1 tire at a time. You can still air up a single flat if you need to, but the duty cycle dwindles to 2min doing 1 tire at a time. Airing up an entire vehicle, 1 tire at a time, will damage the TenSix. It just simply puts out too much air and is optimized for 4 tires at a time.
- Air up a set of 35″ tires in under 5 minutes (with a MF 4 Tire Kit)*
- 10.6 CFM dual cylinder compressor at 0 PSI
- 6.5 CFM at 30 psi
- 150 psi rated
- PSI Cutoff Switch (80psi on, 120psi off)
- 50% duty cycle (20min on, 10min off)
- 12v, 90amps peak, ~50amp running
- 14x7x9″ external dimensions
- 70-75 dB noise level from 1ft distance
- Thicker carrying bag with accessory pockets
- Threaded filter caps so the compressor can be mounted in any direction/orientation
- USA Standard color matched air fitting – “Universal” Coupler (Works with Industrial or Auto fittings 1/4″ plugs)
- 6ft hose off of the compressor
- 6ft electrical cord, terminates in high amperage alligator clips
- WARNING: Compressors get hot! Recommended to wear the included MORRFlate Groovy Gloves while disconnecting air fittings.
- Since the TenSix™ is rated for 10.6 CFM, it is highly recommended to use with a MORRFlate 4 Tire Inflation & Deflation™ Kit to avoid back pressures on the compressor from filling 1 tire at a time.
* 35″ tire air up time from 12psi to 30psi
FREE SHIPPING!
